1. Home
  2. Clear Waves (Windows)
  3. Intermodulation Analysis
  4. Generate Frequency Set From Spectrum Trace

Generate Frequency Set From Spectrum Trace

Clear Waves -- Intermod Settings
Import Last Trace
Clear Waves allows you to generate a frequency set that takes into account interference from both RF interferers and intermodulation products. This is a very powerful feature — it allows you to make channel assignments using frequencies that are free of RF interference and intermodulation distortion.

The results displayed in the ‘White Spaces and Intermod-Compatible Frequencies’ view are sufficient for most wireless audio installations. The frequency set that is computed in real-time is free of RF interference and the most destructive types of intermodulation distortion. However, for more demanding scenarios, it is possible to take the analysis a step further.

When you select the Intermodulation Analysis tab, a new screen is displayed with additional settings, grid and chart. [NOTE: While scanning is in progress then this feature is disabled]. Initially the chart is blank and you’ll need to fill it with a spectrum trace. You can do this by pressing the Last Trace button, which will retrieve the last spectrum trace (assuming you had previously performed some scans).

Clear Waves -- Intermod Threshold
After the RF spectrum data is loaded then its trace will be displayed — along with a horizontal, red line that indicates the White Space Threshold. The White Space Threshold slider controls the threshold signal strength (in dBm) below which is considered ‘White Space’ — that is, frequencies not subject to RF interference and which should be considered potential candidates for the frequency set.  As you adjust this control you’ll see the horizontal, red line move up and down accordingly.  Those frequencies whose signal strength amplitudes exceed the threshold are considered off-limits and are locked-out — that is, they will not be considered as candidates for a frequency set.

In addition to adjusting the White Space Threshold you should select a combination of intermod products you wish to test for from the Intermod Settings panel. The initial set of candidate frequencies from which intermod-compatible frequencies are drawn include multiples of the Step-Size that also fall within the “White Space” — i.e. below the White Space Threshold.

After the White Space Threshold and Intermod Settings have been accounted for, press the Start button to begin the computation.

Clear Waves -- Intermod Results
Intermod Results
When the computation has completed the intermod-compatible frequencies that compose the frequency set are listed in the Results window. They are also displayed graphically on a spectrum trace chart, as shown above. Here you should see that the intermod-compatible frequencies (the vertical white lines) only occur within the ‘White Space’ regions.